The following warnings occurred:

Warning [2] Use of undefined constant CKEDITOR_PLUGINROOT - assumed 'CKEDITOR_PLUGINROOT' (this will throw an Error in a future version of PHP) - Line: 17 - File: inc/plugins/ckeditor.php PHP 7.4.9 (Linux) File Line Function /inc/plugins/ckeditor.php 17 errorHandler->error /inc/class_plugins.php 38 require_once /inc/init.php 233 pluginSystem->load /global.php 18 require_once /printthread.php 16 require_once

9.7 inch debug program (限工程師用) - Printable Version +- Pervasive Displays Customer Zone / Technical Support Forum (http://forum.pervasivedisplays.com/cz) +-- Forum: EMS Factories (http://forum.pervasivedisplays.com/cz/forumdisplay.php?fid=14) +--- Forum: TYT (http://forum.pervasivedisplays.com/cz/forumdisplay.php?fid=15) +---- Forum: Waveform (http://forum.pervasivedisplays.com/cz/forumdisplay.php?fid=97) +----- Forum: 9.7 inch (http://forum.pervasivedisplays.com/cz/forumdisplay.php?fid=749) +------ Forum: E2969JS08x (http://forum.pervasivedisplays.com/cz/forumdisplay.php?fid=772) +------ Thread: 9.7 inch debug program (限工程師用) (/showthread.php?tid=2606)

9.7 inch debug program (限工程師用) - Everest - 10-07-2019 此檔案是針對OTP NG,判別是Master 或 Slave用 上電後 按下SW-2,綠燈閃爍數次,進行OTP燒錄測試,此時會有以下幾種狀況 1. 一段時間後燈號都沒亮,此時有發燙現象.此狀況較難辨別出是Master or Slave 2. 綠燈亮起,代表Master NG 3. 紅燈亮起,代表Slave NG 4. 紅綠燈同時亮起,代表兩顆都NG 5. 綠燈閃爍,代表並無任何異常,請再送回正常燒錄站重燒 以上情況1~4 出現後均須移除電源做RESET, 情況5出現後可以再次按下SW-2做RESET