The following warnings occurred:
Warning [2] Use of undefined constant CKEDITOR_PLUGINROOT - assumed 'CKEDITOR_PLUGINROOT' (this will throw an Error in a future version of PHP) - Line: 17 - File: inc/plugins/ckeditor.php PHP 7.4.9 (Linux)
File Line Function
/inc/plugins/ckeditor.php 17 errorHandler->error
/inc/class_plugins.php 38 require_once
/inc/init.php 233 pluginSystem->load
/global.php 18 require_once
/printthread.php 16 require_once



Pervasive Displays Customer Zone / Technical Support Forum
9.7 E4 SPP009 MTP programming firmware - Printable Version

+- Pervasive Displays Customer Zone / Technical Support Forum (http://forum.pervasivedisplays.com/cz)
+-- Forum: EMS Factories (http://forum.pervasivedisplays.com/cz/forumdisplay.php?fid=14)
+--- Forum: TYT (http://forum.pervasivedisplays.com/cz/forumdisplay.php?fid=15)
+---- Forum: Waveform (http://forum.pervasivedisplays.com/cz/forumdisplay.php?fid=97)
+----- Forum: 9.7 inch (http://forum.pervasivedisplays.com/cz/forumdisplay.php?fid=749)
+------ Forum: E2969JS08x (http://forum.pervasivedisplays.com/cz/forumdisplay.php?fid=772)
+------ Thread: 9.7 E4 SPP009 MTP programming firmware (/showthread.php?tid=2319)

9.7 E4 SPP009 MTP programming firmware - Everest - 06-10-2019

Here is the MTP programming firmware for 9.7 E4 SPP009_JS082, it contain burn_model_name,progamming firmware,OQC,PBI_nonPC
(The 18th serial number is "A")
PBI_nonPC picture : one-dot -> normal test pattern  ->  Red

 PBI_NONPC =>NONPC點，還沒有OTP
 OQC_EPD =>使用Epaper tool點，已燒OTP
 PCBAv6_SPP009 => 測試版OTP 燒錄 (兩段式燒錄的第二段)，不需要barcode reader
 Burn_model_Name =>燒錄機種名跟FPL lot(兩段式燒錄的第一段)，需要barcode reader

使用期限: 20190610~20190710

RE: 9.7 E4 SPP009 MTP programming firmware - Everest - 06-14-2019

第一段燒錄，因為發生無法燒錄的問題。所以先從測試版上面把D5的二極體拿掉。
之後可以燒錄。第二段使用原本的測試版是沒有問題的。
該批暫時先以這版WF來做第一段燒錄。

RE: 9.7 E4 SPP009 MTP programming firmware - Gary.cai - 06-19-2019

Quote:TC097SC1B8-S1 SPP009版本Leading Lot 高低温照片：